Lights (Emergency lighting)
These are the functions of the SelfControl module.
Thu, 28 Jan, 2021 at 7:44 AM
If the LEDs are lit / flash differently than listed in this table, please check that the test button is plugged in correctly. Procedure after an error...
Wed, 21 Apr, 2021 at 8:17 AM
An IL light can be reset by holding down the lens until the LED has flashed 10 times and then lets go. A lamp with a test button can be reset b...
Fri, 11 Dec, 2020 at 11:04 AM
For example, in the case of a KMU-light, the dimming has been changed to 33% via the DIP switches: In order for the change of the dimming to be accepte...
Fri, 29 May, 2020 at 9:43 AM
Please check first whether the fuse (1A inert) is ok. Then the battery connection of the ZAW-Cool lights. The 3x1.5mm² NYM cable may not exceed 1.5m long ...
Mon, 12 Jun, 2023 at 3:01 PM
Handle for opening the luminaire with mounted pane:
Mon, 10 Jan, 2022 at 10:46 AM
You will find three small indentations on the lens: Take a small screwdriver and carefully prise out the lens:
Tue, 6 Jun, 2023 at 10:08 AM
You will find videos on our homepage to make installation easier for you. https://www.rp-group.com/montage-videos
Thu, 9 Nov, 2023 at 10:01 AM