If the LEDs are lit / flash differently than listed in this table, please check that the test button is plugged in correctly.
Procedure after an error has occurred:
Perform a complete reset by holding down the test button until the yellow LED has flashed 10 times. Then leave the lamp connected to the mains 24 hours a day and repeat the test. If the error occurs again, do the following:
1. Fix the error by replacing the battery for example, depending on the error.
2. The luminaire is still within warranty?
-> If you specify the product type, quantity, order number and a detailed error description, contact firstname.lastname@example.org and request an RMA number for your return. Here you will find the return form and further information on the return: