With Smart Switching feature it is possible to use ordinary wall switches as dimmers or control scenes with them. The Smart Switching mode for the luminaire’s power switch can be configured in Casambi app.
It is possible to assign different Smart Switching modes to each Casambi enabled luminaire. For example you can use Smart Switching to switch on several lamps when you come home or switch the lighting to be suitable for dinner party or watching a movie.
Go to ‘Luminaires’ tab and double tap the lamp control you want to assign a Smart Switching mode to. Select ‘Luminaire Settings’ and under Smart Switch tap the current mode to open the Smart Switching selection. As a default the mode is ‘Dim and Save’
There are six different Smart Switching modes:
Dim and save — controls one luminaire
With Dim and Save you can use the lamp’s power switch to set a new default light level. Quickly flick the power switch first off and right away on again and the dimming process will start. When the light has reached the desired light level just quickly flick the power switch off and on again. Now the light level has been saved as a new default. The next time you switch on the lamp it will automatically go to the new default light level.
Cycle through modes — controls one luminaire
If you have set modes to the lamp from Casambi app you can assign the power switch to control the different modes. Modes can be different preset dimming levels, colours or colour temperatures. Flicking the power switch quickly off and on will cycle between the different modes and off.
Control scenes — controls one or multiple luminaires
If you have created scenes with Casambi app you can control them from a single lamp power switch. Just select which scene you want to control with the power switch and then using the power switch will control all the lamps in that scene. So switching on one lamp will switch on also all the other lamps in that scene.
Cycle scenes — controls one or multiple luminaires
If you have created different scenes with Casambi app you can cycle through them with one power switch. Select the scenes you would like to cycle through and flick the power switch off and on to cycle through the selected scenes and off.
Active / Standby — controls one or multiple luminaires
With Active/Standby Smart Switching mode you can control two scenes that have same luminaires in them. Create two scenes, one active scene that should turn on when the controlling luminaire is turned on and one Standby scene that is turned on when the controlling luminaire is turned off. This mode can be used for example with motion sensors.
Not in use
Sometimes it is necessary that the power switch doesn’t do anything special when used. Not in use option will disable our Smart Switching feature.