Lights that were displayed as “Invalid device” before the update may still be displayed as “Invalid device” after WL Pro 3.0.3 has been installed. The “Invalid” flag is saved for devices that have been found once. Therefore, such lights must be reset.
There are two ways to do this:
1. Delete the light manually:
1.1. Select the invalid luminaire -> Open the 3-point menu via the unknown node -> Delete device “XXXX”
1.2. Open the 3-point menu above the unknown node -> Add new emergency light -> Enter 4-digit light address -> Delete button -> OK button
Afterwards, they will be displayed as normal lights and can be integrated into the project.